BLOG
——
11
2024
-
05
Analysis of the working principle of the gearbox of the micro tillage
Author:
When a variable speed mechanism is installed between the gear sets.
1. Gear transmission
The gear transmission in the gearbox of the micro-tiller is the main way to achieve the speed change, which changes the speed ratio of the output shaft and the input shaft through the cooperation of different gears, so as to realize the different operation modes of the micro-tiller. In general, the gearbox of a tiller contains at least two gear sets, which are connected by a gear shaft and are driven by different drivetrains. When a variable speed mechanism is installed between the gear sets, the output speed and torque of the micro tiller can be changed by replacing the gears of different sizes.
2. Clutch disengagement
In the working process of the micro-tiller gearbox, the clutch also plays a very important role. The main function of the clutch is to give the engine power to the force shaft through the gear transmission, so as to realize the normal operation of the micro-tiller. When the clutch is disengaged, the engine and gearing system are completely disengaged, leaving the tires in a released state, thus reducing damage to the tiller.
3. Hydraulic transmission
The hydraulic transmission mechanism in the gearbox of the micro-tiller is generally composed of an oil pump, a hydraulic cylinder, a control valve, etc. Its main function is to adjust the working state of the hydraulic cylinder according to the input signal, so as to realize the different working modes of the gearbox. In practical applications, hydraulic transmission can also help the micro-tiller to achieve precise travel control, improve safety and work efficiency.
In general, the working principle of the micro-tiller gearbox is very complex, and it is mainly composed of gear transmission, clutch separation, hydraulic transmission and other components. Each component has a corresponding function and role, and through the orderly movement trajectory and parameter transmission, the different working modes of the micro-tiller are finally realized. It is hoped that through the introduction of this article, readers can better understand the structure and operation of the micro-tiller gearbox.
Special model of microwalk-behind tractor gearbox
Overview of the special reducer for micro-tillage
2024-05-11
Chongqing New Shuanma Technology Koh., Ltd.
The company specializes in the production of various types of reduction units for soil microworking and agricultural machinery reducer units
Phone: 8613308306594
E-mail:1364918709@qq.com
Address: Chongqing Bishan District, Lifeng Street, Shian Village, Eight Societies
Mobile site
