11
2024
-
05
Full analysis of the gearbox assembly of the micro tillage
Author:
Oil leakage from the gearbox
First, the gearbox assembly structure of the micro tillage
The gearbox assembly of the micro-tiller is composed of multiple components such as gearbox housing, gear, clutch, bearing, and seal. Among them, the gearbox housing is the main part of the gearbox, which is used to support and fix the components inside the gearbox as a whole. Gears are the core components of a gearbox and are mainly used to convert between different travel speeds. The clutch is used to connect and disconnect the power transfer between the engine and the gearbox, the bearings support and reduce friction, and the seals are used to prevent oil and dust leakage.
Second, the working principle of the micro tiller gearbox assembly
During the driving and use of the tiller, the engine transmits power through the crankshaft to the clutch, which in turn transmits power to the gearbox. Inside the gearbox housing, the gears continuously transmit the input power to the output shaft to produce different speeds through the action of synchronizers and bearings, so as to realize the variable speed control of the micro-tiller.
3. Common faults of micro-tiller gearbox assembly and their solutions
1. Oil leakage from the gearbox
If the gearbox is dripping or leaking, the gearbox seals need to be inspected for damage or wear. If the seal is damaged, it needs to be replaced; If it is caused by wear and tear, it needs to be repaired or replaced.
2. Abnormal transmission noise
If there is an abnormal noise in the gearbox, it may be due to wear and tear of the gears. This can be fixed by replacing the gears or replacing the entire transmission assembly.
3. The gearbox is snapped
If the transmission is stuck, you can find the specific cause and take appropriate repair measures by checking whether the clutch is damaged, whether the transmission synchronizer is not working, or whether the transmission shift lever assembly is not operating properly.
Fourth, the micro cultivator gearbox assembly purchase and maintenance suggestions
1. When purchasing, pay attention to choosing products from well-known brands and manufacturers with professional and technical backgrounds to ensure the stability of quality and performance.
2. During normal use, the lubricating oil in the gearbox needs to be changed regularly and maintained to prolong its service life.
3. If maintenance is required, it is recommended to find a professional technician for repair and replacement to ensure the accuracy and safety of the operation.
In short, the gearbox assembly of the micro-tiller is one of the core components of the micro-tiller, which has a very important impact on the performance and service life of the micro-tiller. Therefore, regular inspection and maintenance of the gearbox assembly is very necessary to ensure the normal use of the micro-tiller.
Special model of microwalk-behind tractor gearbox
Overview of the special reducer for micro-tillage
2024-05-11